26,000L-20′ ISO TANK CONTAINER Specification
|
CAPACITY |
26,000 Litres |
Frame (L/W/H) |
6058/2438/2591mm |
TARE MASS |
3,800 kg |
MAX GROSS MASS |
36,000 kg |
PRODUCTS |
General purpose liquids |
HYDROSTATIC TEST PRESSURE |
6 bar |
VESSEL DESIGN TEMP |
-40℃ to 130℃ |
TEMPERATURE (@atm P) |
140℃ |
DESIGN CODE |
ASME Ⅷ DIV. 1 |
TYPE APPROVALS |
UN portable tank (T11 IMDG, CFR49, ADR/RID), UIC, TIR, CSC, TC, ADR L4BN |
CLASSIFICATION |
Bureau Veritas |
STACKING TEST |
Each container is approved for 9 high stacking at 24,000kg |
SAFETY RELIEF ASSEMBLY |
2½” BSP safety relief valve without gauze. Pressure only model set at +4.4 bar (63.8psi), complete with Adaptor and gauge guard |
MANHOLE |
500mm low profile, 8 point fixing. The manlid is completedwith TIR |
AIR INLET ASSEMBLY |
DN 40 ball valve terminating with 1½” BSP connection and cap |
TOP DISCHARGE PROVISION |
DN80 stainless steel 316 tank pad with not less than 94mm hole with blind flange. The assembly is fitted off centre on a low profile horizontal tank pad. Flange to be dual drilled: 6×M12 on 168.3PCD and 4×M16 on 160PCD |
BOTTOM DISCHARGE |
FV: DN80 30° Univalve footvalve terminating with a 3″ BSP spigot with cap and chain. Perolo: DN80 30° TWINCO footvalve terminating with a 3″ BSP spigot with cap and chain. The bottom flange is a normal flange. |
STEAM HEATING |
8 runs steam heating system. Longitudinal steam channels manufactured from Duplex stainless steel. Heating provided to BDC area. Actual heating area 4.57 m2, effective heating area 9.6m2. |
PRESSURES |
4 bar working pressure |
CONNECTIONS |
1″ BSP inlet, 1″ BSP outlet. Stainless steel dustcaps fitted. |
INSULATION |
50mm Rockwool where possible. |